3/8" FPT Heavy Duty Ball Valve (DN10)

High Pressure Plated Brass Ball valves are found in a variety of areas in the pressure washing system. Most commonly, this round-edged, light weight, heavy duty Italian ball valve is found at the base of the spray gun and used as a temporary shutoff while the pressure washer is on. By shutting the water off, the user can then change over to another gun set up without turning the entire system off. This specific series of Italian Ball Valve is a top 5 product of ours every month of the year which goes to show you that tens of thousands of people per year cannot be wrong about their choice of quality!

When installing NPT fittings in these BSP threads, be sure to wrap threads 6-7 times with Teflon tape or 2-3 drops of Loctite.

• Seals manufactured with PTFE (Polytetrafluoroethylene) for improved performance with high heat and chemicals
• 3/8" Female BSP Inlet x 3/8" Female BSP Outlet
• Max - 176° F