Multi Use Mounting Bracket

Use this mounting bracket for filters, ball valves, accumulator tanks and more!

Make removal of filter bowl a snap and keeps debris in the bottom of the bowl where it belongs.

Made from Aluminium.

The top hole (1.75”) fits a 1” bulkhead to mount anything with a 1” pipe thread.

The secondary mount hole (1.38”) fits a 3/4” or 1/2” bulkhead to mount anything with a 3/4” or 1/2” thread.

The bulkheads we sell fall into the previous stated dimensions. If using your own bulkhead measure them for proper fitment.

The two smaller outside holes (.300”) are for mounting a Remco accumulator tank.

Easily mounts to any surface with 3/8” bolts or wood screws.